Start with the body, not the whole paint rack
The VW T1 bus is a two-tone vehicle by reputation, and that is the decision that drives your paint order. You need a body color and a second color for the roof or the lower band, plus a neutral for the interior and running gear. Choosing those three first stops you from buying a dozen tins you will never open.
The kit itself gives you a 1:24 bus with 146 parts, a multi-part body, a detailed interior, a replica engine, rotating wheels and chrome parts, plus decals with various license plates. It is listed for model builders aged 13 and over. What the supplied record does not include is a color callout list, so the exact shades remain your choice rather than a factory instruction.
Why Revell Email Color suits a bus body
Revell Color is a synthetic resin enamel that, per the catalog, does not attack the plastic surface of plastic models. On a large, mostly flat body shell like the T1, that compatibility matters more than any single shade: you are covering broad panels and you do not want a solvent that bites into the plastic.
The same 14 ml tins can also be used on many other materials, so leftover paint is not wasted on bases or display plinths. All colors except signal color can be mixed with each other and thinned with Revell Color Mix, which is what makes a custom two-tone pair practical rather than a lucky guess.
Two tins that cover the classic split
- Gloss "Black" (RAL 9005) Email Color Enamel - 14ml: Gloss "Black" (RAL 9005) Email Color Enamel, 14 ml, a synthetic resin enamel that does not attack model plastic. A gloss black is the natural lower-band or roof contrast on a two-tone bus, and the gloss finish reads well on large flat panels before you add chrome parts.

Gloss "Black" (RAL 9005) Email Color Enamel - 14ml - Matt "Light Green" (RAL 6027) Email Color - 14ml: Matt "Light Green" (RAL 6027) Email Color, 14 ml, mixes and thins with Revell Color Mix like the other colors. A matt light green gives you a period-looking body color that contrasts with gloss black; because both are mixable, you can adjust the green toward a warmer or cooler tone.

Matt "Light Green" (RAL 6027) Email Color - 14ml
Gloss versus matt on the same body
Mixing a gloss and a matt enamel on one model is fine, but plan where each lands. Gloss black on the lower body or roof gives the shine that chrome trim and bumpers sit against. Matt light green on the upper body keeps the large side panels from looking toy-like under room light.
If you want a uniform sheen, the catalog supports mixing the two tins to shift the green, but it does not state a clear-coat product or a flattening additive. Treat an all-gloss or all-matt finish as something you would have to confirm from the full Revell range, not something this record guarantees.
A paint plan you can follow in order
The sequence below uses only what the supplied records confirm about Revell Email Color and the T1 kit.
- 1. Decide the two-tone split: Choose which panels take the gloss black and which take the matt light green before you open a tin. The kit has a multi-part body, so you can paint sections separately rather than masking a fully assembled shell.
- 2. Test the pair on scrap plastic: Both enamels are stated not to attack model plastic, but a scrap test lets you judge how the gloss and matt read next to each other before committing to the body.
- 3. Thin for your method: For brush work, thin with Revell Color Mix only as far as you need for flow. For airbrush work, the catalog confirms the paint can be sprayed after dilution with Revell Color Mix.
- 4. Paint the interior and engine separately: The kit includes a detailed interior and a replica engine. Paint these before they disappear inside the body, using the same enamel system so the finishes stay consistent.
- 5. Clean tools by method: Use Revell Painta Clean for brushes and Revell Airbrush Clean for the spray gun. Matching the cleaner to the tool is the step most often skipped.
- 6. Add decals and chrome last: The license-plate decals and chrome parts go on after the body paint has settled, so you are not handling wet enamel around small parts.
Enamel versus acrylic for this particular bus
The catalog record here covers Revell Email Color enamel only, so the comparison is limited to what that record supports.
- Revell Email Color enamel: Confirmed: synthetic resin enamel, does not attack model plastic, brush or spray gun after thinning with Revell Color Mix, clean with Painta Clean or Airbrush Clean. A practical default for a large two-tone body.
- Revell Aqua Color acrylic: Not described in the supplied records. If you prefer water-based paint, check the Aqua Color range separately; this article cannot confirm its thinner, cleaner or behavior on the T1 body.
The kit the paint has to serve
- VW T1 bus: VW T1 bus model kit, 1:24 scale, 146 parts, 180 mm long, 77 mm wide and 82 mm high, for model builders aged 13 and over. The size tells you how much paint area the body represents, and the 146 parts tell you the interior and engine will absorb paint before the shell is closed.
- VW T1 bus: Includes a multi-part body, detailed interior, replica engine, rotating wheels, chrome parts, illustrated multilingual instructions and decals with various license plates. Sub-assemblies mean you can paint in stages; the chrome parts and plate decals define where a gloss black finish will look intentional.
What the supplied information leaves open
The product records do not give a manufacturer color callout for the T1, a drying or curing time, a recoat interval, or a recommended thinner ratio. They also do not confirm whether a clear coat or flattening agent exists in the Revell range. Plan around those gaps rather than filling them with guesswork: test on scrap, keep coats thin, and let each stage dry before handling.
The 14 ml tin size is the only quantity confirmed. How far one tin stretches across a 180 mm body depends on your thinning and coverage, so buy the two body colors first and add interior colors once the shell is underway.




